1291日
・Plamo-8.2 2023/11/24インストール
待機させていたASRock N100DC-ITXにインストールしてみた
10_xfce + 15_kernsrcをインストール。
$ lspci
00:00.0 Host bridge: Intel Corporation Device 461c
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [UHD Graphics]
00:0d.0 USB controller: Intel Corporation Device 464e
00:14.0 USB controller: Intel Corporation Device 54ed
00:14.2 RAM memory: Intel Corporation Device 54ef
00:16.0 Communication controller: Intel Corporation Device 54e0
00:17.0 SATA controller: Intel Corporation Device 54d3
00:1c.0 PCI bridge: Intel Corporation Device 54be
00:1f.0 ISA bridge: Intel Corporation Device 5481
00:1f.3 Audio device: Intel Corporation Device 54c8
00:1f.4 SMBus: Intel Corporation Device 54a3
00:1f.5 Serial bus controller: Intel Corporation Device 54a4
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
なかんじ。
get_pkginfo -a
野良のlinux 6.1.70にしたら
$ dmesg | grep mic
[ 0.000000] microcode: microcode updated early to revision 0x12, date = 2023-06-26
マイクロコードが0x11から0x12になっていた。
1390日
・カーネル更新
さきほどPlamo-8.xなマシンlinux 6.1.70に更新再起動したので
手元Plamo-8.xなマシンのlinux 6.1.70化終了。
1389日
・謹賀新年
ASRock N100DC-ITX待機中。
1388日
・Plamo-8.x化終わっていた
昨日Plamo-7.xなディスクをPlamo-8.xマシンの2台めディスクに接続替えし
残1台とした。
本日NEC PC-LL750LG3Eなノート久しぶりに起動
$ cat plamo-release
Plamo Linux release 8.0-dev
終わっていた。
まだPlamo-7.xのままと思い込んでいた。
1387日
・ファイルサーバーPlamo-8.x化<その3>
ASRock J4105NHUマザーボードなファイルサーバー
Plamo-7.xからPlamo-8.2 2023/11/24でPlamo-8.x化を行った
手順等はファイルサーバーPlamo-8.x化<その2>と同じ
普通に起動してくれた。
Plamo-8.2 2023/11/24のインストーラー15" 1024x768なLCDに起動途中から無表示
1920x1080な23"LCDでやり直した。
これで手元ファイルサーバー全世代Plamo-8.x化終了
ほっとした。
その他残1-2台。
1386日
・カーネル更新
さきほどPlamo-8.xなマシンlinux 6.1.69に更新再起動したので
手元Plamo-8.xなマシンのlinux 6.1.69化終了。
diary/Nagura 1385日
・カーネル更新
さきほどPlamo-8.xなマシンlinux 6.1.68に更新再起動したので
手元Plamo-8.xなマシンのlinux 6.1.68化終了。
linux6.1.67はパスさせてもらった。
1384日
・カーネル更新
いまPlamo-8.xなマシンlinux 6.1.66に更新再起動したので
手元Plamo-8.xなマシンのlinux 6.1.66化終了。
1383日
・カーネル更新
夕方Plamo-8.xなマシンlinux 6.1.65に更新再起動したので
手元Plamo-8.xなマシンのlinux 6.1.65化終了。
1382日
・ファイルサーバーPlamo-8.x化<その2>
ECS KBN-/I5200マザーボードなファイルサーバー
Plamo-7.xからPlamo-8.2 2023/11/24でPlamo-8.x化を行った
既定値 + 15_kernlsrcをインストール
get_pkginfo -a
このままではSambaは動いてくれないので
avahi-0.8-x86_64-B2.txz
cups-2.4.7-x86_64-B1.tzst
dbus-1.14.10-x86_64-B1.tzst
openldap-2.6.6-x86_64-B2.tzst
上記追加。
samba-4.19.2-x86_64-B2.tzst
普通に起動してくれた。